ø
altezza chamfer
angolo
Complete with through screw for bases; the MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
ø
altezza chamfer
angolo
Complete with through screw for bases; the MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
ø
altezza chamfer
angolo
Complete with through screw for bases; MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
They protect the MU bases prior to prosthetic restoration.
altezze
Rotating; complete with through cover screw h. 3. Screw with 6 mm emergence also available. Must be placed on the MU bases for impression taking.
Material: titanium; complete with through screw for bases; MU provisional abutments are rotating to correct implant non-parallelism.
Material: PMMA; complete with through screw for bases; MU castable abutments are rotating and fully modifiable after waxing, to be cast in gold or other commonly used alloys.
MU analogs must be paired with MU transfers to develop the plaster model.
ø
altezze
They are used after implant uncovering to achieve an optimal emergence profile.
ø
altezze
Complete with through screw and plastic snap cap.
Package of 3 pcs; snap cap for closed-tray impression transfer.
ø
altezze
Complete with through screw
ø
altezze
The analogs must be paired with the transfers to develop the plaster model.
ø
angolo
angolazione chamfer
Complete with through screw. The pre-angled abutments are suitable for cases of divergent implants.
ø
angolo
angolazione chamfer
Complete with through screw. The pre-angled abutments are suitable for cases of divergent implants.
ø
altezze
angolazione chamfer
Complete with through screw. Features and indications for use: The coronal part of the abutment is 6 mm high, while the transmucosal neck varies according to need. Laterally, two grooves are present to prevent rotation of the prosthesis after cementation.
ø
altezze
Complete with through screw. The millable abutment is suitable for cases of non-parallelism that cannot be resolved with standard abutments.
(9628001): conometric connection activated
altezze
Rotating
Complete with through screw. The provisional abutment is indicated as an intermediate abutment in the absence of non-parallelism or as a temporary abutment.
altezze
Anti-rotation
Complete with through screw. The provisional abutment is indicated as an intermediate abutment in the absence of non-parallelism or as a temporary abutment.
ø
altezze
Rotating
Melting range: 1390°–1475°; complete with through screw.
ø
altezze
Anti-rotation
Melting range: 1390°–1475°; complete with through screw
ø
altezze
Rotating
Complete with through screw. The castable abutments are fully shapeable and used after appropriate casting with the preferred alloy. For milling, the use of straight-cut cylinder burs is recommended
ø
altezze
Anti-rotation
Complete with through screw. The castable abutments are fully shapeable and used after appropriate casting with the preferred alloy. For milling, the use of straight-cut cylinder burs is recommended
ø
altezze
The castable part of the bar abutments is rotating to facilitate multiple parallelizations. The preformed titanium base ensures a highly precise connection to the implants.
altezze
Ball: micro 1.8 mm; complete with container and retentive cap. Ball abutments are indicated for cases of complete edentulism and represent an effective solution for stabilizing removable prostheses.
ø
altezze
Products by Rhein ’83 Srl. The OT Equator attachment with reduced profile allows correction of implant non-parallelism up to 25° without affecting the function of the retentive caps. OT Equator set contents: 1 OT Equator abutment, 1 cap container, 4 assorted retentive caps, 1 protective disc.
altezze
Complete with through screw. Usable with intraoral and desktop scanners
Non-rotating; complete with through screw. Millable abutment with original preformed connection for ARUM milling machine.
ø
altezze
Analog for printed models with fixing screw included.
ø
altezze
Rotating and non-rotating; neck height: 1–2 mm; complete with through screw. Bonding interface with original preformed connection.
ø
altezze
Rotating; neck height: 1–2 mm; complete with through screw. Bonding interface with original preformed connection.
