ø
chamfer height
angle
Complete with through screw for bases; the MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
ø
chamfer height
angle
Complete with through screw for bases; the MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
ø
chamfer height
angle
Complete with through screw for bases; MU bases with 17° and 35° angulation facilitate the parallelization of multiple implants with non-parallel alignment.
They protect the MU bases prior to prosthetic restoration.
heights
Rotating; complete with through cover screw h. 3. Screw with 6 mm emergence also available. Must be placed on the MU bases for impression taking.
Material: titanium; complete with through screw for bases; MU provisional abutments are rotating to correct implant non-parallelism.
Material: PMMA; complete with through screw for bases; MU castable abutments are rotating and fully modifiable after waxing, to be cast in gold or other commonly used alloys.
MU analogs must be paired with MU transfers to develop the plaster model.
ø
heights
They are used after implant uncovering to achieve an optimal emergence profile.
ø
heights
Complete with through screw and plastic snap cap.
Package of 3 pcs; snap cap for closed-tray impression transfer.
ø
heights
Complete with through screw
ø
heights
The analogs must be paired with the transfers to develop the plaster model.
ø
angle
chamfer angulation
Complete with through screw. The pre-angled abutments are suitable for cases of divergent implants.
ø
angle
chamfer angulation
Complete with through screw. The pre-angled abutments are suitable for cases of divergent implants.
ø
heights
chamfer angulation
Complete with through screw. Features and indications for use: The coronal part of the abutment is 6 mm high, while the transmucosal neck varies according to need. Laterally, two grooves are present to prevent rotation of the prosthesis after cementation.
ø
heights
Complete with through screw. The millable abutment is suitable for cases of non-parallelism that cannot be resolved with standard abutments.
(9628001): conometric connection activated
heights
Rotating
Complete with through screw. The provisional abutment is indicated as an intermediate abutment in the absence of non-parallelism or as a temporary abutment.
heights
Anti-rotation
Complete with through screw. The provisional abutment is indicated as an intermediate abutment in the absence of non-parallelism or as a temporary abutment.
ø
heights
Rotating
Melting range: 1390°–1475°; complete with through screw.
ø
heights
Anti-rotation
Melting range: 1390°–1475°; complete with through screw
ø
heights
Rotating
Complete with through screw. The castable abutments are fully shapeable and used after appropriate casting with the preferred alloy. For milling, the use of straight-cut cylinder burs is recommended
ø
heights
Anti-rotation
Complete with through screw. The castable abutments are fully shapeable and used after appropriate casting with the preferred alloy. For milling, the use of straight-cut cylinder burs is recommended
ø
heights
The castable part of the bar abutments is rotating to facilitate multiple parallelizations. The preformed titanium base ensures a highly precise connection to the implants.
heights
Ball: micro 1.8 mm; complete with container and retentive cap. Ball abutments are indicated for cases of complete edentulism and represent an effective solution for stabilizing removable prostheses.
ø
heights
Products by Rhein ’83 Srl. The OT Equator attachment with reduced profile allows correction of implant non-parallelism up to 25° without affecting the function of the retentive caps. OT Equator set contents: 1 OT Equator abutment, 1 cap container, 4 assorted retentive caps, 1 protective disc.
heights
Complete with through screw. Usable with intraoral and desktop scanners
Non-rotating; complete with through screw. Millable abutment with original preformed connection for ARUM milling machine.
ø
heights
Analog for printed models with fixing screw included.
ø
heights
Rotating and non-rotating; neck height: 1–2 mm; complete with through screw. Bonding interface with original preformed connection.
ø
heights
Rotating; neck height: 1–2 mm; complete with through screw. Bonding interface with original preformed connection.
